Button 1
For the first button, I decided to create a bridge with a larger material on one side that will close the circuit when the circle was closed. I created a small circle inside with conductive fabric and then ironed it in the inside of a ring that didn’t touch the inside one.
Button 2
For the second button I decided to do a push button with a conductive fabric in both sides and two leather rings in the inside that would require the user to push a little bit harder in order to close the circuit and turn on the light, as a last step I aded a heart to the front part so that it would indicate the exact place to press.
Third Button
For the third and last button I used another material as conductor, I created a headband and used conductive thread to connect it to the alligator clips so that the light would turn on one the headband was closed with the clip.
